Adsorption and absorption

Sodium carbonate, commonly known as Soda ash, is an inorganic chemical compound. It is extracted from Trona, a double-salt containing Sodium hydrogen carbonate and sodium carbonate. It is made after a series of processes where evaporation of salty water takes place at the side of lakes. It is often called washing soda, the most significant […]

The physisorption process is also known as physical adsorption. It depends on the geometry of the adsorbent and the temperature of the adsorption. It is the physical bonding of the gas molecules to a surface that encounters the low temperature gas. Generally, it is due to van der Waals forces. It takes place between all

Aluminium Chloride, also known as Aluminum Trichloride, is a pure compound. It is obtained from the exothermic reaction of aluminium and chlorine. The chemical formula for the pure compound is AlCl3. Aluminium is generally white, but the presence of iron and chloride turns the pure compound into yellow. It is highly optimised for organic reactions.

Froth flotation is a process of material separation considering water association and the density of minerals. It separates gangue and ore minerals. The physical-chemical properties of various chemicals are different. This principle is used for the separation of minerals using froth flotation and has vast practical applications. Some of the uses of froth floatation include

The hardness of water is determined by the concentration of minerals in the water. It contains mainly salts of magnesium and calcium. Normally hard water is not a serious threat to life. But sometimes, it is better to detect and remove it. Hardness causes residues in the dishwasher, less foam with detergents and soap, wearing

Langmuir Adsorption Isotherm refers to the equilibrium between the adsorbent and the adsorbate system. In this method, adsorbate adsorption is always limited to one molecular layer. It happens at or before one reaches the relative pressure of unity. This equation is used in multiple systems with moderately low coverage. Most importantly, it is used to

Hard water is a state of water with dissolved calcium and magnesium. There are two types of hard water. The hardness of water caused by calcium bicarbonate is known as temporary hardness. This dissolving of minerals takes place during normal water cycles, and the grade of hardness sometimes depends on the geological area. Residues in

There is a lot of calcium and magnesium in “hard water,” which derives its name. Since these minerals are in the water, many things can go wrong – they could also harm your life and affect how well the water works in your plumbing. In this article, we aim to provide an understanding of the

Hard water is a state of water with high mineral content. This is mainly caused by dissolved calcium and magnesium. There are two types of hard water: The hardness of water caused by calcium bicarbonate is known as temporary hardness.  Whereas hardness associated with other mineral salts is permanent hardness.  Hardness causes residues in the

Gauss Law is just a law that is general to any closed area that permits the calculation of the field of an enclosed charge by mapping the field for a surface out of the charge distribution. It simplifies the analysis associated with the geometrical symmetry shape of the eclectic field. What is the Gauss Law?